Ir para conteúdo principal

Velour Calf

0.8/1.0mm to 1.0/1.2mm
Description:

Suede velour with a fine grain, characteristic of the base of calfskin used.
Double dyed for intensive colors, and high resistance to light.
Soft and a velvety surface.
Full trimmed

Presentation:
double butt with 0,8 to 1,0 m2
Main use:
Cut (Upper)
Velour Calf
Velour Calf
Velour Calf

Velour Split

1.0/1.2mm to 1.6/1.8mm
Description:

Suede velour with a short hair and a velvety effect
Preferably produced from cow leather, thus allowing in the different thicknesses presented a homogeneous consistency throughout its area.

Presentation:
double butt with 1,2 to 1,6 m2
Main use:
Cut (Upper)
Velour Split
Velour Split
Velour Split

Velour Split Heavy

1.6/1.8mm to 2.8/3.0mm
Description:

Suede velour with a short hair and a velvety effect
Preferably produced from heavy cow leather, thus allowing the indicaded hight thicknesses.
Presented a homogeneous consistency throughout its area, with high strength and durability

Presentation:
double butt with 1,6 to 1,8 m2
Main use:
Cut (Upper)
Velour Split Heavy
Velour Split Heavy

Velour Split Wax

1.4/1.6mm to 1.8/2.0mm
Description:

Finished split, with a mix of oils and waxes that can present:
- a rustic effect, with a closed pore, uniform and consistent
- a vintage effect, with a closed pore, but when handling makes un pull-up effect.

Presentation:
double butt with 1,6 to 1,8 m2
Main use:
Cut (Upper)
Velour Split Wax
Velour Split Wax
Velour Split Wax

Velour Split Hydro

1.4/1.6mm to 1.6/1.8mm
Description:

Split dyed with special fats that allow to obtain a waterproof velour Sanded with a short hair and a velvety effect
For the hydro we use the sympatex rule
- utilization for 7 hours
- maximum moisture absorption 30%

Sympatex
Presentation:
double butt with 1,4 to 1,8 m2
Main use:
Cut (Upper)
Velour Split Hydro
Velour Split Hydro
Velour Split Hydro
Velour Split Hydro
Technical sheet: Available

Velour Split Trend

1.2/1.4mm to 1.6/1.8mm
Description:

Split with a finish that goes to meet the fashion trend defended for each season and collection, it can be:
 - embossed with one or more plates
- transfer application
- serigraphy application

Presentation:
double butt with 1,6 to 1,8 m2
Main use:
Cut (Upper)
Velour Split Trend
Velour Split Trend
Velour Split Trend
Velour Split Trend
Velour Split Trend
Velour Split Trend
Technical sheet: Available

Velour Insoles

1.0/1.2mm to 1.6/1.8mm
Description:

Suede velour with a short hair and a velvety effect.
Double dyed for well fixed colors, and high resistance to light, essential for the use to insoles
Full trimmed

Presentation:
double butt with 1,6 to 1,8 m2
Main use:
Insoles
Velour Insoles
Velour Insoles
Velour Insoles
Velour Insoles
Velour Insoles
Technical sheet: Available

Split Anilina

1.4/1.6mm to 2.8/3.0mm
Description:

Split tanned with chromium, dyed in the intended color.
Finishing embossed with a stamp type natural pore of the skin, pigment, waxes and resins in order to give it a silky and soft touch.

Presentation:
double butt with 1,6 to 1,8 m2
Main use:
Cut (Upper)
Split Anilina
Split Anilina
Technical sheet: Available

By Cast

1.2/1.4mm to 2.2/2.4mm
Description:

Split tanned with chromium, dyed in the intended color
Finished with a polyurethane coating that reproduces the desired grain, with a uniform and durable surface.
Allow a correct respiration without losing its impermeability to external agents
Suitable for use in the manufacture of footwear with direct injection of the sole to upper

Presentation:
double butt with 1,6 to 1,8 m2
Main use:
Cut (Upper)
By Cast
By Cast
By Cast
By Cast
By Cast
By Cast
Technical sheet: Available

Anilina Calf

0.9/1.1mm to 1.2/1.4mm
Description:

Chromium tan skins, with integral grain from european hides of very good quality.
Dyed with soluble aniline dyes and natural drying to obtain a closed, smooth and firm grain, finished only with anilines and waxes to enhance the natural texture of the skin.
The absense of pigments on the surface allows a soft and dry touch that enhances all the naturalness and elegance of a leather.

Presentation:
half hides with 1,3 to 1,7 m2
Main use:
Cut (Upper)
Anilina Calf
Anilina Calf
Anilina Calf
Anilina Calf
Anilina Calf
Anilina Calf
Technical sheet: Available

Orto Calf

0.9/1.1mm to 1.2/1.4mm
Description:

Chromium tan skins, with integral grain from european hides of very good quality.
Dyed with soluble aniline dyes and natural drying to obtain a closed, smooth and firm grain, finished only with anilines and waxes to enhance the natural texture of the skin.
Finish that protects the natural grain, staying visible, but resistant to drop of water

Presentation:
half hides with 1,3 to 1,7 m2
Main use:
Cut (Upper)
Orto Calf
Orto Calf
Technical sheet: Available

Napa Seda

0.9/1.1mm to 1.2mm/1.4mm
Description:

Chromium tan skins, with integral grain from european hides of very good quality.
Dyed with dyes and fats that give it the nature of a very soft skin.
Smooth or slightly milled, silky and transparent finish

Presentation:
half hides with 1,6 to 1,9 m2
Main use:
Cut (Upper)
Napa Seda
Napa Seda
Technical sheet: Available

Anilina Veneto

0.9/1.1mm to 1.2/1.4mm
Description:

Chromium tan skins, from european hides
Dyed with dyes and fats that give it the nature of a very soft skin.
Finish with a corrected grain, dry-milled, silky and transparent

Presentation:
half hides with 1,6 to 2,0 m2
Main use:
Cut (Upper)
Anilina Veneto
Anilina Veneto
Anilina Veneto
Technical sheet: Available

Anilina belo horizonte

0.9/1.1mm to 1.2/1.4mm
Description:

Chromium tan skins, from european or south american hides
Dyed with dyes and fats that give it the nature of a very soft skin.
Finish with a corrected grain, smooth, silky and transparent

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Anilina belo horizonte
Anilina belo horizonte
Anilina belo horizonte
Technical sheet: Available

Anilina Millenium

1.0/1.2mm to 1.6/1.8mm
Description:

Chromium tan skins, from european hides
Dyed with dyes and fats that give it the nature of a very soft skin.
Finishing with pigment, embossed with a stamp type natural pore of the skin, waxes and resins in order to give it a smooth, silk and soft touch.

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Anilina Millenium
Anilina Millenium
Technical sheet: Available

Anilina Pull-Up

1.0/1.2mm to 1.6/1.8mm
Description:

Chromium tan skins, with integral grain from european hides of very good quality.
Dyed with dyes and fats that give it the nature of a soft skin.
Finishing with oils and waxes that creates the pull-up effect, a timeless and classic finish

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Anilina Pull-Up
Anilina Pull-Up
Anilina Pull-Up
Anilina Pull-Up
Technical sheet: Available

Anilina Flooter

1.0/1.2mm to 1.6/1.8mm
Description:

Chromium tan skins, with integral grain preferably of high quality south american hides.
Dyed with dyes and fats that give it the nature of a very soft skin.
Finishing with pigments and resins combined, which after milled produces a texture always different but natural.

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Anilina Flooter
Anilina Flooter
Technical sheet: Available

Anilina linning

0.8/1.0mm to 1.0/1.2mm
Description:

Chromium tan skins, with integral grain and in the designed color, from european or south american hides, closed fibers and a soft structure.
It can also present a corrected grain with a firm but soft structure
Without finish or slight aniline finish.
Flesh side shaved with the minimum of loose fibers

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Lining
Anilina linning
Anilina linning
Anilina linning
Technical sheet: Available

Nobuck

1.0/ 1.2mm to 2.8/3.0mm
Description:

Chromium tan skins, with integral grain preferably of high-quality european hides.
Double dyed for well fixed and intensive colors, and whose surface remains smooth and sanded with fine-grain sandpaper.
Thus obtains a skin, with a “writing” effect that is particularly silky and soft to the touch.

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Nobuck
Nobuck
Nobuck
Technical sheet: Available

Campabuck

1.0/1.2mm to 1.2/1.4mm
Description:

Chromium tan skins, with integral grain preferably of high-quality european and south american hides.
Double dyed for well fixed and intensive colors, surface sanded with fine grain sand, lightly milled so that the movement and heat obtained by this operation, check the skin a particular grain and always different, with an effect of "writing" even more silky and soft to the touch.

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Campabuck
Campabuck
Technical sheet: Available

Nobuck Oil - Ramon

1.0/1.2mm to 2.0/2.2mm
Description:

Chromium tan skins, with integral grain preferably of high-quality european hides.
Smooth and sanded surface with fine grain sandpaper
Finished with a combination of oils and waxes that give it a silky effect, keeping the slight “writing effect”

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Nobuck Oil - Ramon
Nobuck Oil - Ramon
Nobuck Oil - Ramon
Technical sheet: Available

Nobuck Wax

1.0/1.2mm to 2.0/2.2mm
Description:

Chromium tan skins, with integral grain preferably of high-quality european hides.
Smooth and sanded surface with fine grain sandpaper
Finished with a conbination of waxes that give it a slight pull-up effect, keeping the slight “writing” effect particularly silky and soft to the touch

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Nobuck Wax
Nobuck Wax
Technical sheet: Available

Nobuck Hydro

1.0/1.2mm to 2.0/2.2mm
Description:

Chromium tan skins, with integral grain preferably of high-quality european hides.
Dyed with special fats that allow to obtain a waterproof skin
Smooth and sanded surface with fine-grain sandpaper, thus obtains a skin, with a “writing” effect that is particularly silky and soft to the touch.
For the hydro we use the sympatex rule
- utilization for 7 hours
- maximum moisture absorption 30%

Sympatex Norma
Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Nobuck Hydro
Nobuck Hydro
Technical sheet: Available

Nobuck Trend

1.0/ 1.2mm to 2.0/2.2mm
Description:
Peles curtidas a crómio com flôr integral, de couro europeu e couro sul- americano.
Superfície lixada com lixa de grão fino, obtem-se assim uma pele particularmente sedosa e macia ao toque.
Acabamento que vai ao encontro da tendencia da moda defenida para cada estação, pode ser:
- Gravado com uma ou mais chapas
- Aplicação de transfers
- Aplicação de serigrafia
 
Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Nobuck Trend
Nobuck Trend
Nobuck Trend
Nobuck Trend
Technical sheet: Available

Crasy-horse

1.0/1.2mm to 2.0/2.2mm
Description:

Chromium tan skins, with integral grain of european and south american hides
Smooth and sanded surface with fine-grain sandpaper
Finished with a combination of oils and waxes that give it a silky and soft effect.
Highly resistant to use, and a vintage look

Presentation:
half hides with 1,7 to 2,0 m2
Main use:
Cut (Upper)
Crasy-horse
Crasy-horse
Technical sheet: Available